PPC4E v1.2.2.19 Embedded Software
Download(s):
PPC4E v1.2.2.19 Embedded Software (1.31 MB) | TITLE | VER | USE WITH |
| PPC4E™ | 1.2.2.19 2011.6.16 |
PPC4E |
| Instructions: | ||
| Download the file by clicking on "PPC4E.bin".
Run Winflash and select the file downloaded as the file to write to the product. Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox. If your product has an model number ending in "-AF", it requires specific "-AF" embedded software. The updating of embedded software should only be performed after given specific instructions to do so from a Fluke Calibration Authorized Service Center ». If the update isn't performed properly, your product will be inoperable until it is. |
||
| Updates Include: | ||
| Ver 1.2.2.19 (2011 June 16) CHG (PPC-374): The version format has been changed to an all numeric format, comprised of 4 numeric fields. These are the major version, minor version, revision and build fields. They are separated by a '.' FIX (PPC-367): When using the front panel or remote Jog feature, the PPC4E would not achieve a ready condition after a new jog increment was defined. |
||
| Ver 1.02a (2010 Dec 29) FIX(PPC-365): The PPC4E could not properly control negative pressures while in a negative gauge pressure measurement mode. |
||
| Ver 1.02 (2010 Sep 30) Initial release |
||
